Federal Constitution Essay - 1186 Words

The simple turn of a century from the late 1700s to the 1800s brought about drastic change in regard to the United States government. Not only had the rebellious colonies overthrown the oppressive rule of their mother country Britain, but they had already begun to establish their own political domain. Within this realm of the newly founded democracy were two conflicting parties. On one side was the Jeffersonian Republicans, led by Thomas Jefferson himself and later on by James Madison. Those who composed this legislative faction tended to believe in strong state governments, a feeble central government, and a rigid interpretation of the constitution. Opposing the Jeffersonian Republicans were the Federalists of America. The federalists†¦show more content†¦(Document A) Jeffersonian Republicans believed they were campaigning for the best interests of the American people. They supported a strong state government rather than a powerful central government because the states were closer to their people. The state governments knew best how to regulate its own people. Within the Constitution it says the central government of America must stay out of religious affairs and other state issues of that sort such as building roads and canals (Document H). Therefore, by acting in the peoples interests, the Jeffersonian Republicans were compelled to strictly follow the Constitution. Document B illustrates this. Certainly no power to prescribe any religious exercise, or to assume authority in religious discipline, has been delegated to the general {federal} government. It must then rest with the states. As Thomas Jeffersons presidency unraveled itself, the ideals of his fellow Jeffersonian Republicans began to evolve with the times. For example, when the Louisia na territory became available on the market for Americans to purchase in 1803, Thomas Jefferson was obligated to buy it because of the nations need to expand. In this particular act he obtained a loose interpretation of the Constitution and allowed himself to purchase the land even though he did not have congressional approval. I am certainly not anShow MoreRelatedThe Federal And Texas Constitution1143 Words   |  5 PagesThe Federal and Texas Constitution, despite both being created to outline governmental power, differ in the enforcement of the order created by focusing on entirety of the country and the individual people respectively. This is shown through the extent of control on legislative power, the issues presented in each Bill of Rights, and the overall fluidity of the document while in effect. The Constitution of the United States, signed September 17, 1787, is the basis of all government in the UnitedRead MoreThe Constitution And The Federal Government3242 Words   |  13 PagesThe Constitution was written so that the Federal Government would actually have some ability to govern unlike it had in the previous Articles of Confederation. They wished to establish a more organized justice system which under the Articles, was the States responsibility and could vary greatly from place to place. They also wanted the ability to raise an Army, to help protect its citizen’s lives and liberties. After The Revolution many of the founding fathers feared a large government and preferredRead MoreFederal Law And The U.s. Constitution Essay836 Words   |  4 Pageso U.S. Constitution Under the application of Federal Law and the U.S. Constitution it has been specifically addressed that a fetus has not been granted the rights and privileges of a person. The topic in itself is highly controversial with arguments originating on both sides of the discussion platform. Legal civil liberties have focused on the rights and privileges of the mother. Components of the U.S. Constitution that would have a direct bearing in formulating a reasonable course of action wouldRead MoreFundamental Liberties in Federal Constitution2333 Words   |  10 PagesINTRODUCTION:   Fundamental liberties in Malaysia can best being referred to our own Federal Constitution (FC). It is fall into part II of the Federal Constitution. It basically refers to Malaysian liberties throughout their lives living in Malaysia. There are 9 articles regarding the fundamental in the Federal Constitution starting from articles 5 to 13. The United Nations Universal Declaration of Human Rights also recognised fundamental liberties as it stated that,all human beings are born freeRead MoreFederal Law And The United States Constitution Essay1796 Words   |  8 Pagesclaimed, this Court relies on the State Constitution and â€Å"‘advert[s] to federal law only as an aid to our analysis.’† In re Hamel, 137 N.H. 488, 490 (1993) (quoting State v. Gravel, 135 N.H. 172, 176 (1991)). Furthermore, this Court is not bound to adopt the federal analyses. State v. Ball, 124 N.H. 226, 233 (1983). This Court has the power to interpret the New Hampshire Constitution as more prote ctive of individual rights than the United States Constitution and has done so before. Ball, 124 N.H.Read MoreThe Constitution Set The Ground Work For The Federal Government1757 Words   |  8 PagesThe Constitution set the ground work for the federal government and the three branches government it is divided into. The philosophy behind the Constitution was create a government that was not too weak and not too strong but had equal power. The legislative, executive and judicial branches all serve a different purpose but play a very important role in the US government. The Judicial branch is the most important branch of government as it has the power to overrule unconstitutional laws and evaluateRead MoreThe Constitution Of The Federal Republic Of Mexico1828 Words   |  8 Pagesstructure, and power of Texas government Consequences 1824 Federal Constitution of United Mexican States Part of the Federal Republic of Mexico. Purpose is to establish independence from Spain After the war of independence that separated Mexico from Spain as an independent country and oust of Agustin I as the ruling monarch, Mexico established a federal republic Immigration and assimilation of Anglo-Americans into Mexico This constitution of United Mexican States provided for a very weak nationalRead MoreDifferences between the State and the Federal Constitution Centers1104 Words   |  4 Pagesput in place. For the federal government, however, decisions are tied more directly to what the US Constitution says or what it has been interpreted to mean, and it is very difficult to change. STATE VS FEDERAL CONSTITUTIONS: It should first be noted that state constitutions contain the supreme laws of each state, mostly by detailing the limitations of authority and specific protections for maintaining individual liberty. The US constitution does this too for the federal government and providesRead MoreCommercial Law Case Study Essay922 Words   |  4 PagesAccording to the Australian Constitution, the power to make laws vested in the parliament , whilst the power to interpret laws and to judge whether they apply in individual cases, vested in the High Court and other federal courts. In fact, one of the major function of the high court is to interpret the Constitution. For instance, the High Court of Australia may rule a law to be unconstitutional, that is beyond the power of parliament to make, and therefore of no effect. Such a circumstance wouldRead MoreRule of Law in the Constitution1448 Words   |  6 PagesIntroduction A ‘free society’ is a system of interaction between humans wherein every person can participate in a civilised manner and without discrimination. In Australia, the Commonwealth of Australia Constitution Act 1900 (Imp) is the primary source by which society operates as an essentially free society. This paper seeks to establish that the functioning of such a society is dependent upon the existence of a legal framework supporting the rule of law, which is ultimately, an ideology.

Development of Language Free Essays

The manner in which children learn to understand and successfully communicate through language is among the most important questions studied by psychologists. The appropriate use of language is central to virtually all aspects of learning and social development. Successful and appropriate language communication is also closely linked to the individual’s place in society, while the inability to communicate clearly hampers and may virtually eliminate a person’s ability to cope with even the simplest educational and social situations. We will write a custom essay sample on Development of Language or any similar topic only for you Order Now The drawings produced by preschoolers can be channeled by parents and teachers so that they can print letters for a start. They will not be able to distinguish writing from drawing initially but around the age of 4, children will show distinctive features of print like forms arranged in a line on the page (Levin Bus, 2003 as cited in Chapter 8). The studies of imitative language focus on children’s acquisition of grammatical rules by observational learning. Investigators have also been interested in whether the substance of a child’s language can be modified by exposure to social models (without any reinforcement to the child for appropriate responses). Numerous experiments have now disclosed that principles for generating novel responses can be acquired through observation of others (Bandura and McDonald, 1963). If principles of language usage, rather than mere words, can be shown to be acquired through observational learning, then, thus would provide at least a partial account of the process of language acquisition. Erik Erikson as psychoanalyst taught that any person, child or adult faces specific life crisis that they have to resolve in order to perform their tasks (Atkinson 1993). During early childhood or preschool, a child develops an ability to initiate activities (Atkinson 1993). teachers have to learn how to encourage or discourage them in order that the child would not feel inadequate (Atkinson 1993). During middle child hood or elementary, children learn various skills such as reading and writing, but they have to interact socially with others in order to feel successful or competent, otherwise they would feel inferior (Atkinson 1993). During this time, a teacher should constantly but reasonably praise a child for a job well done. Another way of supporting the development of language in early childhood is through make-believe play. Piaget claimed that by pretending, young people can now practiced and strengthen newly acquired representational schemes (Chapter 9). How to cite Development of Language, Papers

Ball Bearings Essay Example For Students

Ball Bearings Essay The object of ball bearings (and roller bearings) is the substitution of pure rolling motion for plain sliding friction. Ball Bearings rely on the rolling motion of hardened steel balls to absorb loads. This rolling motion produces far less friction than the sliding motion. These steel balls are held in circular rows between an outer and inner ring, which have raceways, or slots, grooved into them to guide the balls. Ball bearings are available in both filling-slot and no filling-slot types. Other types of bearings have developed from these basic designs, like double-row and deep groove bearings, to handle specific application. No filling-slot bearings have a deep uninterrupted raceway, which allows them to carry both high radial loads as well as moderate Thrust loads. Filling-slot bearings have more balls than no filling bearings of comparable size. This gives them a higher radial load capacity, but Thrust loads must be light. Types of Ball bearing systems:Rigid single row ball bearing. Basic type of bearing widely used. The balls run in comparatively deep grooved tracks, which make the bearing suitable for both radial (journal) load and axial thrust load. The bearing provides location of the shaft in relation to the housing when provided with suitable means of clamping. Rigid single row bearing with filling slots for balls. This bearing contains more balls than the standard type and can therefore take heavier radial loads but only limited thrust. Rigid double row bearing. For heavy radial loads and to provide greater rigidity. Requires accurate location if used in conjunction with another bearing. Self-aligning double row bearing. For applications in which slight deflections cannot be avoided when rotating. Aligning single row bearing. This bearing will correct initial angular misalignment between shaft and housing but is not designed to accommodate shaft deflection or misalignment when rotating. Angular contact single row bearing. Gives precise axial location under thrust load. May be used in pairs to accommodate thrust in either direction. Duplex bearing. Used to take heavy thrust in either direction or some radial load. Adaptation sleeve bearing. This bearing is mounted on a tapered split sleeve to simplify assembly on long shafts. No matter what type of ball bearing system they all have one common function, to turn sliding forces into rotational forces, so that the coefficient of friction is reduced and hence so is the force opposing the motion (friction). There is some friction but this is much lower than if two surfaces where slid over the top of each other.

Lifespan Developmental Theories

Approaches to Lifespan Development Nature versus Nurture debate reflects two contrasting approaches to understanding the specifics of the factors influencing the lifespan development of a person. The first one is based on the belief that humans acquire most of their traits from nature, which means that the hereditary factor is the one determining the development of the personality.Advertising We will write a custom assessment sample on Lifespan Developmental Theories specifically for you for only $16.05 $11/page Learn More The second approach is based on the assumption that people acquire their traits from the environment, which means that the child is born with no specific characteristics and his/her behavioral patterns develop from the external influences throughout different life stages. While there is a vast amount of literature exploring both of the approaches, the modern sources mainly claim that both internal and external factors shape the persona lity. In his article, Sameroff (2010) presents a view that unites the achievements of investigations in both nature and nurture influences on the development and calls for considering the two approaches as interrelated and complementary to each other. The author presents a well-developed reasoning for the claim that determining the influence of inner and external factors should not be regarded as opposing approaches and bases his assumptions on the data from relevant studies. Sameroff uses a considerable number of scholarly references to support his point of view. The information he presents is clear and detailed, and the assumptions he makes are logical and well-grounded. The article can be considered credible and serve as an illustration to the inappropriateness of contrasting nature and nurture, as the knowledge about the interaction between the hereditary factors and environmental influences is the key to understanding the complex process of human development. Though Sameroff an d many other scholars regard to nature and nurture as the approaches that should be integrated, many scientists still view them as contrasting to each other. Within the theoretical framework of nature approach, the development is regarded as the result of the combination of hereditary factors given to every person from the birth. The advocates of this approach consider studying the genes the key to understanding the origins of the traits developed by people. Cool (2014) analyzes Galton’s study on twins and comes to a conclusion that the stories of twins show the prevalence of nature over nurture. The adherents of nurture approach view environmental influences as the main factors shaping the development of a person and value the family and social environments as the main predictors of the personal traits the person develops throughout the life. However, as it was mentioned previously, the majority of modern scholars insist on the importance of studying the personality developm ent by integrating nature and nurture approaches (Kandler 2014; Robinson 2004).Advertising Looking for assessment on psychology? Let's see if we can help you! Get your first paper with 15% OFF Learn More Many scientists support such integration by presenting the evidence of the fact that even epigenetic factors are susceptible to the influence of environment, which means that nature and nurture are not opposing but impacting each other (Tammen, Friso, Choi, 2013; GadjeV, 2015). Therefore, only the integration of both approaches can provide the modern science with an opportunity to understand and predict such a complex process as personality development across a lifespan. Contributions of Theory to Practice Operant learning theory would predict that Karen will search for the opportunities to express herself and receive empathy from the members of the group in the next group session. Such behavior is stimulated by positive reinforcement Karen received during the previou s session from the group members who supported her and the counselor who reflected her emotions with concern and sensitivity. Erikson’s developmental theory suggests that the negative outcomes of the crisis experienced by Karen might include the development of the feeling of loneliness and angst and considering oneself incapable of loving and being loved. The positive outcomes might include Karen’s motivation to learn to make compromises and sacrifices necessary for long-term intimate relationships. Social learning theorists would predict that the group will be ready to support Karen again, as its participants observed the positive result of demonstrating empathy to the person suffering from the crisis in the relationships. Multidimensional or systems view can be applied to solutions for Karen’s developmental concerns by suggesting that the assessment of various internal and external factors influencing the woman’s personality should be conducted to revea l what factors have a negative impact on the development of her mature personality and eliminate them. The knowledge of theory contributes to our understanding of lifespan development significantly by revealing that this is a complex process influenced by numerous factors and teaching us that no single approach can be considered as the most righteous one. Instead, the integration of various approaches is the key to understanding the specifics of different stages of lifespan development better. Such knowledge is essential for the work in counseling psychology, as understanding the origins of traits and behavioral patterns of the person is the key to finding the methods to eliminate negative factors and help the person to deal with disturbing problems or overcome crisis. Theoretical knowledge is the key to successful practice in profession aimed at providing psychological assistance for people facing problems at different stages of the development of their personalities.Advertising We will write a custom assessment sample on Lifespan Developmental Theories specifically for you for only $16.05 $11/page Learn More References Cool, A. (2014). Twins, nature, and nurture. BioSocieties, 9(2), 225-227. Gadjev, I. (2015). Nature and nurture: Lamarck’s legacy. Biological Journal of the Linnean Society, 114, 242–247. Kandler, C. (2014). Personality development between nature and nurture. Keynotes / Personality and Individual Differences, 60, S79–S82. Robinson, G. (2004). Beyond nature and nurture. Science, 304(5669), 397-399. Sameroff, A. (2010). A unified theory of development: A dialectic integration of nature and nurture. Child Development, 81(1), 6-22. Tammen, S., Friso, S., Choi, S. (2013). Epigenetics: The link between nature and nurture. Molecular Aspects of Medicine, 34, 753-764. This assessment on Lifespan Developmental Theories was written and submitted by user Swarm to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

Engineering Essay on From Electric Power Steering to the Airbag System Essays

Engineering Essay on From Electric Power Steering to the Airbag System Essays Engineering Essay on From Electric Power Steering to the Airbag System Essay Engineering Essay on From Electric Power Steering to the Airbag System Essay Bosch, Nissan, Toyota, Audi, and Oxford University. [6][7][8][9][10][11][12] As of 2013, three U. S. states have passed laws permitting autonomous cars: Nevada, Florida and California.. Vehicular communication systems Individual vehicles may benefit from information obtained from other vehicles in the vicinity, especially information relating to traffic congestion and safety hazards.Vehicular communication systems use vehicles and roadside units as the communicating nodes in a peer-to-peer network, providing each other with information. As a cooperative approach, vehicular communication systems can allow all cooperating vehicles to be more effective. According to a 2010 study by the National Highway Traffic Safety Administration, vehicular communication systems could help avoid up to 81 percent of all traffic accidents. [82] In 2012, computer scientists at the University of Texas in Austin began developing smart intersections designed for autonomous cars.The intersections will have no traffic lights and no stop signs, instead using computer programs that will communicate directly with each car on the road. [83] Public opinion surveys In a 2011 online survey of 2,006 consumers in the US and the UK conducted by Accenture, 49% of those surveyed said they would be comfortable using a driverless car. [84] According to a 2012 survey of 17,400 vehicle owners conducted by J. D. Power and Associates, 37% of all survey responders initially said they would be interested in purchasing a fully autonomous car. 85] However, that figure dropped to 20% once they learned the technology would cost an additional $3,000. With an additional cost of $3,000, 25% of the male vehicle buyers were willing to pay for a fully autonomous vehicle, while only 14 percent of women wanted the feature. [85] AIRBAG SYSTEM An airbag is a part of the safety restraint system in cars. Airbags are bags that rapidly fill with air when an accident happens. That way they can prevent injuries that occur be cause the driver hit a hard object. An airbag is a useful vehicle safety device.Airbags are used in the world increasingly because in accidents, it can help passengers reduce shock. When the sensor feels a strong shock, the gas device explodes. This gas fills the bag immediately. An airbag, also known as a Supplementary/Secondary Restraint System (SRS) or as an Air Cushion Restraint System (ACRS), is a flexible membrane or envelope, inflatable to contain air or some other gas. Air bags are most commonly used for cushioning, in particular after very rapid inflation in the case of an automobile collision. History of airbagsAn American inventor, Dr. Allen S. Breed, invented and developed a key component for automotive use. Breed Corporation then marketed this innovation first in 1967 to Chrysler. A similar Auto-Ceptor crash-restraint, brandon, developed by Eaton, Yale ;amp; Towne Inc. for Ford was soon offered as an automatic safety system in the USA. The Italian Eaton-Livia company of fered a variant with . The first patent on an inflatable crash-landing device for airplanes was filed during World War II. In the 1980s, the first commercial airbags appeared in automobiles.Since model year 1990, all new cars sold in the United States have been required to have airbags on both driver and passenger sides. To date, statistics show that airbags reduce the risk of dying in a direct frontal crash by about 30 percent. Today, some cars have six or even eight airbags. How airbags work First, moving objects have momentum (the product of the mass and the velocity of an object). If no outside force acts on an object, the object will continue to move at its present speed and direction (because of inertia). Cars consist of several objects, including the vehicle itself, loose objects in the car and, of course, passengers.If these objects are not restrained, they will continue moving at whatever speed the car is traveling at, even if the car is stopped by a collision. Stopping an objects momentum requires force acting over a period of time. When a car crashes, the force required to stop an object is very great because the cars momentum has changed instantly while the passengers has not (there is not much time to work with). The goal of any supplemental restraint system is to help stop the passenger while doing as little damage to him or her as possible.What an airbag wants to do is to slow the passengers speed to zero with little or no damage. The constraints that it has to work within are huge. The airbag has the space between the passenger and the steering wheel or dashboard and a fraction of a second to work with. Even that tiny amount of space and time is valuable, however, if the system can slow the passenger evenly rather than forcing an abrupt halt to his or her motion. Motorcycle airbag In 2006 the airbag was set up for a motorcycle. This was in the Gold Wing by Honda. 1] Air bags supplement the safety belt by reducing the chance that the occupants h ead and upper body will strike some part of the vehicles interior. They also help reduce the risk of serious injury by distributing crash forces more evenly across the occupants body. One recent study concluded that as many as 6,000 lives have been saved as a result of airbags. However, the exact number of lives saved is almost impossible to calculate. SPECIAL VEHICLES (EARTH MOVERS/ EXCAVATORS) Excavators are heavy construction equipment consisting of a boom, stick, bucket and cab on a rotating platform (known as the house).The house sits atop an undercarriage with tracks or wheels. A cable-operated excavator uses winches and steel ropes to accomplish the movements. They are a natural progression from the steam shovels and often called power shovels. All movement and functions of a hydraulic excavator are accomplished through the use of hydraulic fluid, with hydraulic cylinders and hydraulic motors. Due to the linear actuation of hydraulic cylinders, their mode of operation is fun damentally different from cable-operated excavators.Excavators are heavy construction equipment consisting of a boom, stick, bucket and cab on a rotating platform (known as the house). The house sits atop an undercarriage with tracks or wheels. A cable-operated excavator uses winches and steel ropes to accomplish the movements. They are a natural progression from the steam shovels and often called power shovels. All movement and functions of a hydraulic excavator are accomplished through the use of hydraulic fluid, with hydraulic cylinders and hydraulic motors.Due to the linear actuation of hydraulic cylinders, their mode of operation is fundamentally different from cable-operated excavators. Configurations Excavators come in a wide variety of sizes. The smaller ones are called mini or compact excavators. Caterpillars smallest mini-excavator weighs 2,060 pounds (930Â  kg) and has 13 hp; their largest model is the largest excavator available (a record previously held by the Orenstei n ;amp; Koppel RH400) the CAT 6090, it weighs in excess of 2,160,510 pounds (979,990Â  kg), has 4500Â  hp and has a bucket size of around 52. m? depending on bucket fitted. Engines in excavators drive hydraulic pumps; there are usually 3 pumps: the two main pumps are for supplying oil at high pressure (up to 5000 psi) for the rams, swing motor, track motors, and accessories, and the third is a lower pressure (700 psi) pump for Pilot Control, this circuit used for the control of the spool valves, this allows for a reduced effort required when operating the controls. The two main sections of an excavator are the undercarriage and the house.The undercarriage includes the blade (if fitted), tracks, track frame, and final drives, which have a hydraulic motor and gearing providing the drive to the individual tracks, and the house includes the operator cab, counterweight, engine, fuel and hydraulic oil tanks. The house attaches to the undercarriage by way of a center pin, allowing the ma chine to slew 360Â ° unhindered. The main boom attaches to the house, and can be one of several different configurations: * Most are mono booms: these have no movement apart from straight up and down. Some others have a knuckle boom which can also move left and right in line with the machine. * Another option is a hinge at the base of the boom allowing it to hydraulically pivot up to 180Â ° independent to the house; however, this is generally available only to compact excavators. * There are also triple-articulated booms (TAB). Attached to the end of the boom is the stick (or dipper arm). The stick provides the digging force needed to pull the bucket through the ground. The stick length is optional depending whether reach (longer stick) or break-out power (shorter stick) is required.On the end of the stick is usually a bucket. A wide, large capacity (mud) bucket with a straight cutting edge is used for cleanup and levelling or where the material to be dug is soft, and teeth are no t required. A general purpose (GP) bucket is generally smaller, stronger, and has hardened side cutters and teeth used to break through hard ground and rocks. Buckets have numerous shapes and sizes for various applications. There are also many other attachments which are available to be attached to the excavator for boring, ripping, crushing, cutting, lifting, etc.Before the 1990s, all excavators had a long or conventional counterweight that hung off the rear of the machine to provide more digging force and lifting capacity. This became a nuisance when working in confined areas. In 1993 Yanmar launched the worlds first Zero Tail Swing excavator,[2] which allows the counterweight to stay inside the width of the tracks as it slews, thus being safer and more user friendly when used in a confined space. This type of machine is now widely used throughout the world.There are two main types of Control configuration generally use in excavators to control the boom and bucket, both of which s pread the four main digging controls between two x-y joysticks. This allows a skilled operator to control all four functions simultaneously. The most popular configuration in the US is the SAE controls configuration while in other parts of the world, the ISO control configuration is more common. Some manufacturers such as Takeuchi have switches that allow the operator to select which control configuration to use. Excavator attachmentsHydraulic excavator capabilities have expanded far beyond excavation tasks with buckets. With the advent of hydraulic-powered attachments such as a breaker, a grapple or an auger, the excavator is frequently used in many applications other than excavation. Many excavators feature a quick coupler for simplified attachment mounting, increasing the machines utilization on the jobsite. Excavators are usually employed together with loaders and bulldozers. Most wheeled, compact and some medium-sized (11 to 18-tonne) excavators have a backfill (or dozer) blade .This is a horizontal bulldozer-like blade attached to the undercarriage and is used for levelling and pushing removed material back into a hole COLLISION AVOIDANCE SYSTEMS A considerable amount of research is addressing eSafety systems of the future. Much work is being carried out on technologies such as collision avoidance systems but their usefulness in addressing high-risk crash scenarios typical of most European roads as well as their feasibility has yet to be determined.Research on collision warning and collision avoidance systems is taking place in Japan, the United States and in the European Union within the European Commissions eSafety programme. Very large estimates of the safety potential of such systems have been claimed following laboratory studies, but the range of technical and behavioural issues involved in many of the concepts require full on-road assessment. To be practical, most of the proposed systems require a well controlled traffic situation, such as that foun d on motorways, but where the casualty reduction potential is relatively low.For an overview of key issues [41]OECD, 2003 Road safety: impact of new technologies. Various systems are under development: Forward Collision Warning Is a system which comprises a visual and audible warning that the driver is too close to the vehicle in front. The warning depends on how long the distance is between the vehicle and the vehicle ahead. The level of warning changes from safe to critical as the following distance decreases. The Reverse Collision Warning System Is a visual and audible system which warns drivers about the likelihood of collision with an object behind the vehicle by means of sensors in the rear bumper.The warning intensifies when the distance between the vehicles rear and the object decreases. Adaptive Cruise Control (ACC) Enhances automatic cruise control found in many new vehicles by automatically maintaining a set following distance to the vehicle in front. The distance to the preceding vehicle is measured by radar, laser systems or both. When the speed of the vehicle in front is slower than the adjusted speed, the ACC system adjusts vehicle speed to allow a safe distance to the lead vehicle. Collision Mitigation by brakingIs an evolution of ACC with the addition of a braking system that increases headway by braking; these systems may also detect obstacles within the road and brake accordingly. The speed and separation distance at which the systems operate is determined by the arrangement and type of sensors and the recognition ability of the systems. Lane-Keeping Devices Are electronic warning systems that are activated if the vehicle is about to veer off the lane or the road. Times to collision in safety-critical lane changes are normally much less than one second.Since mean driver reaction time is about one second, there is not sufficient time for a driver to respond to a warning before crashing. Because there is insufficient time for reaction to a war ning, lane change and merging crashes can probably only be avoided by intervening systems. But these have their own problems: how to detect driver intentions and how to intervene. This may be by taking over the steering from the driver or by providing feedback through the steering wheel. The technical and operational feasibility of such systems has still to be demonstrated. Most existing systems are warning only systems.

Definition and Examples of Correlative Conjunctions

Definition and Examples of Correlative Conjunctions In English grammar, correlative conjunction is a phrase that joins together two other  words, phrases, or clauses. These conjunctive pairs, as they are sometimes known, are used commonly in everyday communication.   How to Recognize Them The elements connected by correlative conjunctions are usually parallel  or similar in length and grammatical form. Each element is called a conjoin. An easy way to spot them in a sentence is to remember that they always travel in pairs. Conjoins must also match: nouns with nounspronouns with pronounsadjectives with adjectives These are the primary correlative conjunctions in English: both . . . andeither . . . orneither . . . nornot . . . butnot only . . . but also Other pairs that sometimes have a coordinating function include the following: as . . . asjust as . . . sothe more . . . the lessthe more . . . the moreno sooner . . . thanso . . . aswhether . . . or Used properly in a sentence, correlative conjunctions (shown in italics) look like this: I like  not only  to be loved  but also  to be told that I am loved.I have  neither  been there nor  done  thatIn the end, we will remember  not  the words of our enemies  but  the silence of our friends. All of these sentences can be broken into two separate sentences, and their overall meanings will not change. Correlative conjunctions allow you to compare and contrast, giving your language additional context. Proper Parallel Structure There are a number of grammatical rules governing how to use correlative conjunctions properly.  One common mistake that English students make is not pairing the proper preposition by using a conjunction. For example: Incorrect: The cabinet was designed not only for storing linens but also protecting wool clothing.Correct:  The  cabinet was designed not only for storing linens but also for protecting wool clothing. This rule extends to pronouns and antecedents as well. When joining two subjects (the antecedents), any pronoun that follows must agree with the closest antecedent. Look at this example: Incorrect: Neither your mother nor her sisters are planning to donate her portion of the estate to charity.Correct:  Neither your mother nor her sisters are planning to donate their portion of the estate to charity.Incorrect: Either the twins or Bobby will say they cant go.Correct:  Either  the twins or Bobby will say he cant go. Another thing to remember is that correlative conjunctions can only join two other words. Joining three words looks awkward and is grammatically incorrect. For instance: Incorrect: Either lead, or follow, or get out of the way.Correct: Either lead, follow, or get out of the way. Sources Mikoluk, Kasia. Correlative Conjunction: Basic Grammar Rules Explained. Udemy.com. 15 May 2014.Sherlock, Karl. Correlative Conjunctions. Grossmont.edu. 9 February 2015.Write.com staff. Correlative Conjunctions: What Are They? Write.com. Accessed 21 March 2018.

Market Entry into China (According to case study finish a Report) Essay

Market Entry into China (According to case study finish a Report) - Essay Example China becomes a hot favourite for investment in the sectors of cooperative enterprises, joint ventures. â€Å"According to Zhang (2005), the impact of the overseas Chinese on China’s FDI inflows can be seen at least in two ways. First, the overseas Chinese invest in China based on language and historical bonds; accordingly they possess advantages in operations in China. Second, the overseas Chinese act as a bridge through which foreign investors understand the Chinese culture.† (Devinney et al 2010). The country, however, did not allow solely foreign-owned ventures earlier, and they had limitation of technological support. This situation has now changed and through export from other countries they now have all the infrastructural facilities. China has now removed many limits, which were also different from their WTO promises and encouraged foreign-owned ventures to guide in higher technology and add to their export quantity. Thus, only foreign-owned enterprise under joint venture model is the most accepted structure of FDI in China. There are a mixture of FDI available in China and the most common among them have been the Equity Joint Venture, Co-operative Joint Venture, and, to rising quantity, completely Foreign Owned Enterprise. However, they have a viable system of legislation and ground rules for creating such ventures and suitable government approvals and business licenses are mandatory. Hong Kong and East Asia are the main sources of FDI in China. Presently Taiwan is also a major source of China’s FDI with increasing amount of investment. Taiwan positions as the second place of FDI in China. â€Å"During the past two years, the government has been working to reform the foreign investment approval system. The approval procedure for five categories of foreign investment has now been vastly simplified, as the central government has allocated significant approval power to its local counterparts.   For foreign investment projects with

Case Problem Assignment Example | Topics and Well Written Essays - 750 words

Case Problem - Assignment Example Laws include the Federal Lanham Act, the State laws in the form of consumer protection laws, and the case laws acting as a precedent. C. It will be unconstitutional to ban the advertisement. The justification may be that though the present law grants the government power to regulate advertisement under certain conditions as per Central Hudson v. Public Service Commission and Board of Trustees of the State University of New York v. Fox, , the conditions remain unfulfilled. In the present case the question is whether the government will have the power to regulate liquor advertising in the state of Washington. The conditions which will allow the government to do so would be presence of substantial state interest, which is actually there in the present case in the form of a need to stop under aged drinking. The second condition is whether the regulation directly advances the interest, which it doesn’t as there’s no proof that banning advertisement will stop under aged drink ing particularly. The third condition is that the regulation is not unreasonably extensive than what is necessary, which it is, as there is no evidence that it will stop underage drinking in particular and will surely affect the liquor business. Case problem-2 The sales representative is not correct in her assertion, as it is material whether the commercial speech is true or false. The reason is that commercial speech is not protected under, any law, if it’s false and misleading, as in the present case. Certain statutes and Federal Trade Commission Rules prohibit it, in addition to the case laws which act as a precedent to support the cause. If the national company is taken as a competitor to my present online business, civil suit can be brought against the company for publishing false or misleading description of its goods. In addition to the Lanham Act, the state consumer protection laws also protect the consumers against false and misleading advertisements given by a busin ess. Finally, the Federal Trade Commission (FTC) also prohibits it. The FTC can invoke its powers, with regard to false and misleading advertisement, if the communication is an advertisement, the advertisement affects interstate commerce and the advertisement is false or deceptive. In addition to the remedies offered by the courts under the Lanham and consumer protection laws in the form of injunction and fines, the FTC has its own set of remedies to take care of the issue. The FTC publishes specific guidelines for advertising in an entire industry. The FTC has voluntary compliance remedy, which will seek a voluntary agreement from the advertiser to terminate a campaign and to repeat the same, without any sort of determination. Moreover, the FTC can make consent agreements with the advertisers, issue a litigated order in case the advertiser refuses to sign the consent order, force the advertiser to prove the claims made in an advertisement by Substantiation and move to court for an order of injunction. Case Problem-3 The consumer organization is correct in its assertion, as the conditions laid down by FTC for an ad to be taken as false and deceptive are fulfilled. In the present case there is a representation which will mislead the consumer. The exercise club states that clients of the club lose 30 to 50 pounds in two months, yet, they didn’t make their claim based on substantial evidence. When they

Byzantine vs. Roman Empire Essay Example for Free

Byzantine vs. Roman Empire Essay The Byzantine Empire actually ruled under the Roman Empire until Its demise In AD 476. Both of these empires were located near the Mediterranean Sea and both had a written set of laws. Emperor contanune the First converted to chrlstlanlty after ordering his soldiers to put a cross on their shields and then being victorious in battle. After his conversion, he united the military power of Rome with the young Roman Catholic Church. Because of this union he was able to conquer much of the known world at he time. In the Byzantine Empire, Christianity and the differing ideas about it caused great conflict. When the idea of religious icons came about, Emperor Leo Ill created Iconoclasm, which permitted the smashing of these religious icons. The events following the creation of Iconoclasm showed how distant the church was from the government. Eventually the quarrel led to the separation of the Catholic Church from the Eastern Christian Church, known as the Great Schism. This resulted in the Orthodox Church. Despite the differences in the effects that Christianity had on each Empire, it is clear that in both societies, religion was always in opposition with the government. There were many factors that led to the decline of both the Roman and the Byzantine Empires. In Rome, the empire simply became too large. They had to resort to using mercenaries to defend their excess land, but they often rebelled against the government. The separation of the empire into east and west also proved to be detrimental to the empire. The western side, the Romans, was defeated by Germanic barbarians who unseated their last emperor, a 14 year old boy, In AD 476. Although the Eastern Roman Empire, Byzantium, survived for another 1,000 years, Its Inevitable demise came about through the arrival of the Bubonic Plague, which was only the first crisis that moved the empire towards collapse. Byzantium was also constantly faced with military challenges from outside Invaders, and the Great Schism eliminated any possibility of outside help. The Byzantines used a multitude of tactics to try to keep enemies away, but the empire eventually fell to the Ottoman Turks In 1453. Both the Roman Empire and the Byzantine Empire held an alarming amount of xternal enemies, which undoubtedly was crucial In the demise of the empires; however It was mainly Internal conflicts that destroyed both empires. Justinian ended up winning back a large part of the territory Ancient Rome had ruled at i ts height, including Italy and parts ot Spain and Nort Roman and the Byzantine Empires differed in a multitude of ways despite their direct link to each other, they were also similar in their location, their religious opposition to the government, and their severe internal problems.

Gene One Problem Definition :: Business Strategy Analysis

To grow or not to grow, that is the dilemma. Many companies are often faced with this challenging decision. The consequences of this decision may be the overall success or failure of the organization. Change is often necessary to create opportunities for growth and profitability. In fact, change is required for companies looking to grow the business (Andersen, 2005). Such changes may include modifying the existing culture of the organization and the company's leadership philosophy. McShane and Von Glinow (2004) define organizational culture as the set of core values, beliefs and behaviors shared by the members of an organization. Culture determines how formal or informal an office is, how much emphasis is placed on rules and regulations, how approachable senior management is, how problems are tackled and successes shared, etc. It is important, particularly in times of change, for companies to have a clear sense of who they are, what they stand for and what behaviors their people must exhibit for the organization to be successful. Having a clear vision has a positive impact on the organization and its employees. Having a strong sense of who the company is and what it stands for promotes an environment where people demonstrate a commitment to the company's core values, such as providing excellent customer service, being dedicated to quality, acting with integrity, and showing respect for each other. These values keep the company on course, regardless of the changes and challenges that are faced. Core values enable the company to not just weather the difficult times, but to come through them an even stronger organization. This paper explores the challenges and opportunities faced by Gene One and identifies end state goals used to measure success. It will show the benefits of revamping the existing culture of an organization in an effort to drive business results and experience growth and profitability. Gene One, faced with increasing demands in the biotech industry, is challenged to grow the business 40 percent per year for three years, become a publicly traded company, raise capital and develop new products. The company has experienced rapid growth, growing annual revenue from $2 million to $400 million over its first eight years. The CEO and Executive Board of Gene One are implementing the strategy to become a public company in order to gain access to the much needed capital for new product development and marketing.

Outline and Evaluate Research Essay

Many eyewitnesses are called to testify because they have witnessed a crime, accident or incident. The anxiety if this may cause an affect on the reliability of their EWT. There are two main issues in this question: firstly the prediction of the Yerkes Dodson Law that as arousal increases, then so does performance weather spotting, stage performance, or memory encoding, up to an individual optimum level. However, after this optimum level it is suggested that the performance of the individual will decline, this could be triggered by terror. This theory was supported by Deffenbacher et al’s research. The second issue is the â€Å"weapons focus effect†; In Easterbrook’s research he predicted that attention will narrow to the source of the threat e.g the knife the man is holding therefore peripheral detail is lost e.g the details of the perpertrator’s face. This was supported by Loftus’s laboratory studies in an artificial environment using film and sli des, using independent groups design, where a control conditions showed the participants a similar scene without weapons. In the first group they had a scene which they believed to be a real life violent crime involving a weapon, results showed that the participants remembered the knife in great detail but no other features, such as the perpetrator’s face clothing etc. However the participants in the control conditions witnessed the same person but only in a peaceful situation and the participants were able to recognise the man when given 50 photos. When we examine real life eye witness testimony recall however, there is excellent recall of detail, and the weapons-focus effect was not supported. Yullie and Cutshall (1986) conducted a natural experiment on 13 out of 21 bystanders who had witnessed a violent shooting 4-5 months previously. There recall was detailed and accurate and they were resistant to leading questions months after the event. Therefore, this suggest that bystanders had reached the optimum level ( Yerkes Dodson Law) when they they witnessed the death of the robber who had previously wounded the owner in Vancouver gun shop before the owner killed him. Weapon focus did not influence witness recall. Therefore we need to examine witnesses to the violent crime who faced a weapon rather than a bystander to confirm the effect of weapon focus shown by Loftus. The natural experiment conducted by Christanson and Hubinette (1993) in Sweden re-interviewed 58 witnesses (customers and bank tellers) to bank robberies that occurred around Stockholm in one year. Those witnesses who faced the weapon (bank  tellers) they had better recall and accuracy of the event after a period of time rather than the bystanders. Optimum arousal is suggested but weapon focus is challenged. The ecological validity of this evidence is high although the participants cannot be randomly assigned to the experiment and there is no control condition as there would be in a laboratory experiment. However, Laboratory experiments lack the intense arousal of a real crime so the supposed weapons effect may be the effect of distinct and unexpected events distracting participants to the unusual element in the familiar. A strong point of Loftus’s field experiment and supports the weapon focus effect; is that it has ecological validity and comparison to the control condition provide strong support. A criticism is the inability of researchers fro randomly allocate participants in this study to experimental and control conditions to control individual differences.

One Lonely Evening Essay

Do Sunflowers have a faster grow faster when watered with clean drinking water from the tap or with rain water collected outside? Hypothesis If both plants receive the same amount of water each day, then the plants receiving rain water would have a faster growth rate. This is rain water has more nutrients in it then regular drinking water. These nutrients would make the sunflowers grow at a faster rate than the sunflowers with regular water. Variables Independent: the type of water, either clean drinking water from the tap. Dependent: the growth of the sunflower. Control: Each plant will receive the same amount of water as any other. Also the plant will receive the same amount of sunlight as each other, lastly the plants will be measured and water at the same time every day. Control of Variables The way that the variables will be controlled are the plants will receive the same amount of water ( ¼ cup daily). This is to insure that they receive a proper amount for the plant to survive. The amount of light that the plants will obtain will be from the sun. The plants are to be placed in the same window to receive the same amount of lights (preferably a bay window). The plants will be measured the same time daily and also watered the same time daily so that there is no confusion that the plants could have had more growth time one day. Also, the plants will be measured with the same ruler every time they are measured to ensure the measurements are equal. Materials The materials needed for this biology lab are: * 10 sunflower seeds per type of water (total of 20) * 20 separate planters * A ruler (for measurement) * Two  ¼ cup for watering the plants * Source of rain water * Source of clan drinking water * Light source, the sun * Soil | Ruler ¼ Cup of waterSunflowerSunflower seedSoilPlanter| Method For starting the lab first place the even amount of soil into the 20 planters. After the planters are equally filled with soil dig a hole in the center of the each planter, 3 cm deep. Place the seeds into the holes that were just dug in the planters, and separate the planters into 10 rain water planters and 10 drinking water planters. When lining the planters up place the planters every other so that they will receive the same amount of light and one not the other receives more than the other (ex. Rain, Tap, Rain, Tap†¦). Be sure to place the planters to a window that receives a large amount of natural light. After the lab is all set up then the plants are to be watered with  ¼ cup every day at the same time daily (a good amount for them so they are not over watered). The seeds will take time to germinate; they should be checked every day. The measuring is to be started after the sunflowers have broken through the soil and are showing above the soil. For the lab the plants are to be measured everyday at 7pm for the growth from the previous day. After the Experiment has gone for 31 days, look at the results and calculate the average for each of the days and also calculate the standard deviations. Conclusion The following experiment supported my hypothesis of sunflowers watered with rain water will grown faster than those watered with clean drinking water from a tap. This is shown in the data I have collected; it is shown when you compare the average heights of the sunflowers during the trials. The average height of the sunflowers being watered in rain water was higher than the flowers being watered in tap water the last day the average height for the flowers watered with rain water was 19.28 cm while the flowers being watered with tap water was only 13.59. Another indication is that the error bars that are shown on the graph are not as large in the rain water as they are in the tap water and also the rain water flowers heights where closer to one  another than the flowers being watered in tap water. The flowers being watered with rain water broke the soil earlier and had a much more rapid increase in height than the flowers watered in the tap water. With all this evidence, it is clear that the experiment supported my hypothesis and rain water allows plants to grow faster than regular clean drinking water. Evaluation Evaluating Errors One of the errors is that the length of time that this experiment was conducted in. The experiment was conducted in 31 days; this amount of time was too short because it takes on average for sunflowers to germinate from7-14 days. This length of time is valuable time that is being wasted from the waiting for the flower to geminate. Another error that can be spotted in the experiment is the lighting. This experiment was done in the month of December. This month has one of the shortest day light hours which created some problems with how fast the plants grew because of the lack of light that they have received. Improvements One improvement in that can be made in my experiment is how the plants were watered. They were all watered with a  ¼ measuring cup, but it is hard to have precisely  ¼ cup for each plant. This can be better measured with a larger cup that has the labelling of  ¼ cup on it. This improvement will allow the water to be measured more precise and will allow equal measuring to each plant. The temperature of the water is another improvement that can be obtained in this experiment. The water that was given to the plants during the 31 day duration was not measured for temperature. The temperature of the water can help the plant with its growing. The way that this can be fixed is prior to watering the plants be sure to measure the temperature so that the temperature is always the same and there is no flexibility in the temperature of the water. Last improvement that could be made to allow the experiment to be more precise and accurate is for the collection of more data to occur. The way that this improvement could be placed into the experiment is by either extending the length of time of which the collection of data is recorded, another option would be to collect the data twice daily to allow more measurements to be recorded.

Free Essays on A Comparitive Analysis Of Rock Music Of The 60s.

James Moody is a world-renowned saxophone player. He has played with many famous musicians, such as: Dizzy Gillespie and Miles Davis. In this past concert he played with Tim Jenkins on piano, Dwayne Dolphin on bass, and Roger Humphries on drums. This jazz band was the best I have ever seen. James Moody had very good improvisational skills on the three saxophones and even on the flute. On January 19, 1943, the oil refinery seaport of Port Arthur, Texas won the heavenly birth of rock and roll's first female superstar. Janis Joplin, the first child that was born to the Joplin family in a city and not on a farm (Joplin 26). She was idolized by the public, but her life was bent on self-destruction behind all the glamour and curtains of fame and stardom. But there was more to Janis than just lyrics and good entertainment on stage. Janis was a bright, precocious child with a winning smile and a manner about her that charmed people (Joplin 28). She was a child who liked people and she got the same treatment in return. She showed great respect for older individuals and went out of her way to help others. Everyone seemed to love young Janis. Her sister Laura looked up to her very much. They shared a special bond that some young people today have never experienced. Even though there was a six year age difference, they always got along great. Janis displayed an independence t hat pleased her parents when it showed her creativity and originality. Mom was quick to follow up on an interest expressed by her children, especially if it was artistic in nature (Joplin 29,36). Jimi Hendrix: Rock 'n' Roll Legend The extraordinary performances, recording, and lyrics of James Marshall Hendrix have made him impossible to forget. This American rock guitarist made a legendary mark. Not only in the history of rock 'n' roll, but also on pop culture as a whole (Mitchel1 32). With unique techniques never seen before and blatant sex-related performances on stage,... Free Essays on A Comparitive Analysis Of Rock Music Of The 60s. Free Essays on A Comparitive Analysis Of Rock Music Of The 60s. James Moody is a world-renowned saxophone player. He has played with many famous musicians, such as: Dizzy Gillespie and Miles Davis. In this past concert he played with Tim Jenkins on piano, Dwayne Dolphin on bass, and Roger Humphries on drums. This jazz band was the best I have ever seen. James Moody had very good improvisational skills on the three saxophones and even on the flute. On January 19, 1943, the oil refinery seaport of Port Arthur, Texas won the heavenly birth of rock and roll's first female superstar. Janis Joplin, the first child that was born to the Joplin family in a city and not on a farm (Joplin 26). She was idolized by the public, but her life was bent on self-destruction behind all the glamour and curtains of fame and stardom. But there was more to Janis than just lyrics and good entertainment on stage. Janis was a bright, precocious child with a winning smile and a manner about her that charmed people (Joplin 28). She was a child who liked people and she got the same treatment in return. She showed great respect for older individuals and went out of her way to help others. Everyone seemed to love young Janis. Her sister Laura looked up to her very much. They shared a special bond that some young people today have never experienced. Even though there was a six year age difference, they always got along great. Janis displayed an independence t hat pleased her parents when it showed her creativity and originality. Mom was quick to follow up on an interest expressed by her children, especially if it was artistic in nature (Joplin 29,36). Jimi Hendrix: Rock 'n' Roll Legend The extraordinary performances, recording, and lyrics of James Marshall Hendrix have made him impossible to forget. This American rock guitarist made a legendary mark. Not only in the history of rock 'n' roll, but also on pop culture as a whole (Mitchel1 32). With unique techniques never seen before and blatant sex-related performances on stage,...

Business and Professional munication Skills

The updated textbook written by Beebe & Mottet addresses the skills of the business and professional munication as the core concept. It emphasise on the global leadership in today’s global workplace. This is an important source as it does not bind the munication methods in limits. It explains the five fundamental principles of munication that provides a great framework of teachings. The authors has explained these principles by applying them on various professional and business contexts like interview, teams and groups, workplace relationship and presentations. The drawback of the book is that it focuses mainly on the global level example, where as some small scale organisation’s examples would have very useful to understand different scenarios. This reference is a great choice as a resource because it answers a number of questions that need to be answered in my report. It explains the importance of bringing in the new technology in an organisation. The best part is it takes in focus the national as well as global level petitiveness that an organisation has to face and how a new technology can help in gaining in the petition is explained thoroughly. It also explains the implementation and training support that is required for introducing the technology. The drawback of this article is that it is a general article on the introduction of the technology in the organisation and thus does not focus on the technology selected for the organisation. This newspaper article is important because it explains that in today’s scenario of business how important CRM is. It explains five most important C’s for a successful start-up business and that includes the CRM. It says that it doesn’t matter what is the size of the pany CRM is an important factor that should always be present in the pany. This article helps in giving weight to justification of using this technology in the organisation. Though, this article is related to other C’s also. So, basically very less information is being given on our topic but, whatever is given is useful for the report. The report that needs to be written is to convince the management to introduce the new technology that is CRM in the organisation, and this article hammer the last nail to it. This article explains how CRM software can change leads into great opportunities. It emphasise on the use of CRM and how beneficial it will be for an organisation. This article explains the process to use CRM for the pany’s benefits. The article is very well-written but, lacks practicality. Some options are not very practical for all the organisations to use. This journal article is the one that explains about the new technology that needs to be introduced in the organisation. This article covers all the points required to write a report about the new technology and the questions related to it. This article focuses on explaining about the CRM software, how it will be beneficial for the pany, what are the limitation of the software, the budgeting required for it, and the other information required is also there in the article. The article has a good approach towards the subject, but it was written in 2010, some its content may have get old and therefore, not very useful. This article revolves around the procedure to find the best CRM software for an organisation. It is helpful to know what type of software will be helpful and beneficial for the pany. There are various CRM software in the market and every software has its own speciality. It b es difficult for a pany management to decide which CRM software is best suited with the pany’s requirements here this article helps and provide steps to find the best CRM software. Article is very helpful, but it is too long and bit difficult to understand the steps given to select the CRM. Many statements clashes with each other that confuse the person reading it. Problem- the pany wants to increase its clientele by working on to increase more online orders. Background of the problem - the pany has website that take online orders but it is not satisfied with the number of orders it is getting so the management has decided to add a new technology to reach the potential customers. Gathering of information - the information will be gathered with the help internet. Using correct keywords like ‘CRM Software’, ‘Options of CRM software’, ‘New technologies available for organisations’, ‘How to gain more online customers.’ From all the sources available the best and most informative sources will be used to shortlist the information required to write the report. Ahmad, S. (2014). Technology in Organizations.  International Journal Of Research In Business Management,  2(7). Beebe, S., & Mottet, T. (2013).  Business & Professional munication: Principles and Skills for Leadership  (2nd ed.). San Marcos: Pearson. Kubi, B., & Doku, A. (2010). Towards a successful customer relationship management: A conceptual framework.  African Journal Of Marketing Management,  2(3), 037-043. Retrieved from www.academicjournals.org Leary, B. (2015).  Determining the best CRM software for your organization.  SearchCRM. Retrieved 23 March 2017, from searchcrm.techtarget Mahalingam, T. (2016).  Startups expect five Cs from firms: coaching, customer relationship, capital, connects and cofounders, says Ravi Gururaj.  The Economic Times. Retrieved 23 March 2017, from economictimes.indiatimes Nadeau, A. (2015).  Lead Management: 5 Ways CRM Software Converts Leads Into Opportunities.Thevarguy . Retrieved 23 March 2017, from thevarguy

Uniform Commercial Code, section 1-302 Research Paper

Uniform Commercial Code, section 1-302 - Research Paper Example This is because of the aspect that owing to the prevalence of stern laws and regulations, companies and individuals in the commercial business domain has not been able to work freely and ensure trade and business in the best possible manner. Furthermore, owing to the prevalence of diverse range of rules and regulations regarding business in various states of the US, there was an extreme lack of uniformity and balance in legal structure, which has one way or the other had hindered effective performance of the business units and traders (SBA, â€Å"Uniform Commercial Code†). In order to ensure efficacy and less complexity in the commercial business domain, the government of the nations has emerged with the proposal of formulating a common law and codes of regulations that can be used uniformly in every state of the US, especially in the domain of commercial business. The codes were first published in the year 1952 and where subject to severe criticism in the initial phases owing to some of its policies (Legal Information Institute, â€Å" § 3-312. Lost, Destroyed, Or Stolen Cashiers Check, Tellers Check, Or Certified Check.†). These set of codes were primarily developed with the intention to harmonize the legal structure of the US with regard to sales of goods and services in more than 50 states of the US. It helped in regulating and governing the commercial business sector of the country in the most efficient manner through developing flexible and simple policies that can be adopted commonly by all the states that are associated with commercia l business. The most vital objective of these set of codes is that it govern each and every transaction of the business units within the commercial trading, so that efficient results can be obtained in the eventual stages. With the presence of UCC in the scene, different states within the US have been able to work with utmost efficacy during intra-state business as that the

Pilando Golf Resort Essay Example | Topics and Well Written Essays - 500 words

Pilando Golf Resort - Essay Example There are usually some bookings during lunch hours especially on weekends and during dinner hours. The hotel serves a range of dishes due to the diverse nature of the clientele. Besides serving food to guests and other recreational facilities, the hotel offers golf tournaments to its clientele. My experience at the facility as a volunteer exposed me to the various operations of business and the relations with guests at the facility. The experience at the resort exposed to various processes that relate to businesses. An important aspect of the business involved the development of a range of strategies including communication skills. Good communication skills are important in handling of the customers. Customers are different are usually relate to workers in different ways. In the hospitality industry, it is necessary for waiters to develop good communication skills in order to attract and retain the clients. Pilando Golf Resort has a very strong work ethic. Workers are usually motivat ed to provide their best services in order to attract and retain the clientele. The management also helps the workers to develop key skills that are necessary for proper handling of the guests. Usually, the management handles most of the issues that concern the welfare of the guests. The organizational structure of the resort involves a team of managers at the top, followed by supervisors, and finally the workers. The top-level management usually handles decision-making at the resort. Various departments coordinate to ensure the smooth running of the facility. Some of the departments include customer care department, finance department, planning department, and many others. Each department operates according to the mission and vision of the business.

Effective Assessment Practices Paper Essay Example | Topics and Well Written Essays - 1000 words

Effective Assessment Practices Paper - Essay Example 1. Assess student readiness for learning -- Any information that the student needs is available to them in some way. Usually this material is part of the syllabus. It will include any pre-requisites for the course that are needed, the ways that are acceptable for the course to be completed (how to submit assignments etcetera) and the consequences of cheating or plagiarism. 2. Learning objectives, instructional and assessment activities are aligned -- students will be informed in this section about the criteria that will be used to evaluate discussions, core concepts, grading and assignments as well as student projects. Due dates will be clear and each student will know what is expected. 3. Multiple assessment strategies -- This section evaluates the different types of assessment that include things like reference lists of materials students can use, options for the assignments, tests and quizzes, papers or projects and any other type of assessment that the instructor feels is necessary for the course to be completed. 4. Regular feedback -- students should receive feedback quickly from the instructor and the teacher should guide the student for improvement. Rubrics are important to allow all students to know what is expected, the grading scale is described and if necessary there are practice exercises. 5. Self-assessments and peer feedback -- some instructors include self assessment practice assignments that they make available to students before tests. Others have specific questions, have peer review or students get to apply their work to rubrics. 1. Evaluation criteria -- criteria should reflect instruction, the essence or key attributes of a skill or body of knowledge to be mastered and all criteria must be teachable (students must be able to improve). 1. DFN 12012 Assessment for Cardiovascular Respiratory Renal Block (Appendix A)-- this rubric does not meet the criteria for a good rubric. The rubric asks students

Sociology for social work

Sociology for social work Sociology offers some important social theories, which provide explanations and critiques of human behaviour, social actions and interactions as well as the institutions and the structures of society. The fact that social work is concerned with social change and problem solving is precisely why sociology is important to social work. Nowadays social workers are expected to write their reports in a coherent way, justifying it using theory and research. In this essay I am going to contrast two different sociological theories to the case study of Mrs. B. This will give me the chance to better understand the usefulness of the sociological theories to the Social work profession. For the purpose of this essay I have selected to apply Functionalism theory (macro) and Symbolic Interactionism (micro) approach the Labelling theory. In the first section of this essay I will discuss the Functionalist theory, its application to the case, the limits of this theory when looking at the case of Ms B a nd contrasting it to the other theory I will go on to the second part of this essay where I will be applying the Lebelling theory from the Symbolic Interactionism approach I will then go on and do the †¦Ã¢â‚¬ ¦. Functionalism views society made up from numerous interconnected parts which together form a system. The basic part of this breakdown is the society, and its variety of parts can be understood in terms of their collective relationship. In the initial stages of this theory Functionalism drew comparisons between society and the human body. Mainly this comparison existed since they viewed society operating in theoretically the same way as the organisms in the human body. Therefore, for one to understand the function of an organ, such as the heart or lungs, it is essential to understand its relationship with the other organs in the human body and especially its contribution towards the maintaining of the organism. Thus, they argued that for one to understand the function of society, an examination and analysis is required in order to determine its relationship with the other parts of society, and most importantly, its contribution to the maintenance of society. For example, in Mrs B case a functionalist analysis to her situation would consider the behaviour of Mrs B as deviant, because it is preventing her from participating in society. She is seen as unable to fulfil her role as a mother and her social interactions are affected. Supposing that she has permit to work it would be unable to find or maintain a job due to her deviant behaviour. Functionalists would consider this as a â€Å"faulty socialisation†. Further more functionalism would view this situation as costing to society therefore not contributing to the maintenance of the society functioning. According to Emile Durkheim (1895), the founder of Functionalism, crime and deviance are normal and necessary. Since they are found in all societies functionalists argue that it is a form of social change, as through deviance the society would learn about the accepted behaviour. However, too much crime can bring on a state of Anomie Anomie, which is a state of normlessness in society. This arises when cultural goals and structural means of achieving those goals is unbalanced. The anomie state would result in conflicting the agreement of the functioning of society. Durkheim described the state of anomie as (Giddens) ‘a feeling of aimlessness or despairtraditional moral controls and standards are largely broken downthis leaves many individuals in society feeling lack of meaning in their daily lives. (2007, P14) Durkheim (1895) suggested that the theory of Merton gives an idea of the individuals who have high expectations and are unable to fulfill them through structural means then ‘strain occurs. Robert Mertons (1938) ‘Strain theory modified the Durkheims ‘Anomie to refer to the strain put on individuals when accepted norms conflict with reality. Linking these to the case of Mrs B, her asspiration to enter paid employment does not coincide with her immigration status. Therefore this disparity between desires and fulfilment will be felt in deviant motivation. Therefore this could be the point where Mrs B feels the strain and as a result deviates from the societis norms. Agnew (1992) in Levinson (2002) shows how the strain theory can lead to other deviant adoptions. Agnew criticises the earlier strain theory and ‘generalises the concept to include all negative relations with others, rather than just the negative relations that are the result of striving from uneatable, but culturally mandated goals. (2002, P:1579). â€Å" It is not so much the unique quality no any single event but the cumulation of several stressful events within a relatively short time span that is consequential† (P:62-63) as cited in Levinson (2002). Mrs B has Agnew placed great importance to the feeling of ‘anger as he argued that ‘anger is the key emotion because it increases the individuals level of felt injury, creates a desire for retaliation/revenge, energizes the individual for action, and lowers inhibitions, in part because individuals believe that others will feel their aggression is justified (P:60) as cited in Levinson (2002)

Comparing Carbon Footprint of Reusable Nalgene Water Bottles to Single

One of the greatest problems facing humanity is global climate change. Global climate change is the increase in average global temperature, caused by an increase in greenhouse gases. Greenhouse gases are the blanket of gases surrounding the earth that allow the world to be inhabitable. This layer of water vapor, carbon dioxide, methane, and other gases works in the same way that a greenhouse does, by trapping heat energy inside the atmosphere. Unfortunately, since the Industrial Revolution, people have released more of these gases into the atmosphere, thickening the blanketing layer. This thicker layer traps more heat, leading to dramatic changes in the earth's climate. In order to reduce to potential climate change, the amount of greenhouse gases being released need to be reduced. One starting point to reducing the amount of greenhouse gases that you release is to find your carbon footprint. The carbon footprint is the total amount of greenhouse gases that is emitted over the full life of a process. Although it is called the carbon footprint, it is a measure of the total greenhouse gases released, converted to the equivalent amount of CO2. This number is not completely accurate, but it is a good estimate of the amount of CO2 released into the atmosphere through our activities. Once you have found your personal carbon footprint, you can begin to work to reduce it. One way to reduce your carbon footprint is to look closely at each product you use, and find a more carbon efficient version. This paper can help you with that. In this paper, you will find a comparison of the carbon footprint o... ...s&oldid=228960982 Pacific Institute (2008). Bottled Water and Energy: A Fact Sheet. Retrieved July 31, 2008, Web site: http://www.pacinst.org/topics/water_and_sustainability/bottled_water/bottled_water_and_energy.html Pimental, David & Marcia. "Energy use in food processing for nutrition and development." Retrieved July 31, 2008, from http://www.unu.edu/unupress/food/8f072e/8f072e06.htm Neustaedter, Randall (7/18/2004). Plastic Water Bottles. Retrieved July 31, 2008, from Holistic Pediatric Association Web site: http://www.hpakids.org/holistic-health/articles/108/1/Plastic-Water-Bottles Images http://jamaicaplainforum.org/wp-content/uploads/2008/02/low-carbon-diet-earth.jpg http://archives.zinester.com/13183/128920/202817_global-warming%20(Small).jpg http://www.martin-waugh.com/wp-content/uploads/2007/08/water-drop-1b.jpg http://www.nalgene.com

A Geographical Study of Sydney

Population growth in Sydney is mostly due to natural increase (more births than deaths). The rest of Sydney's growth comes from immigration. Sydney has a population of 4.1 million people and is expected to grow by 40,000 people a year for the next 25-30 years. People & Housing In Sydney, the average household is becoming smaller. This means more dwellings are needed to house the same number of people. This is becoming a problem and in the future, we will need around 23,500 new homes every year. These dwellings will be flats, units and villas. Age Profile The population in Sydney is aging as people are living longer. The number of people aged over 65 will double in the next 25 years. p.11 I believe that these issues are good reflections of the problems in Sydney. From my experience, urban growth – high demand for growth, housing – a lack of space and smaller dwellings, ageing communities – a lack of facilities that care for the elderly, the protection of Sydney's natural environments – little park areas in the city, a lack of infrastructure, poor transport systems, and the time needed to travel outer Sydney are all issues that I have noticed. TASK 4 The Government expresses a desire to be sustainable. Is this a realistic goal given the extent of the key issues facing Sydney? What do you think we should do? The government expresses a desire to be sustainable, but is this a realistic goal? I believe so, however, a lot of changes have to be made to achieve this ambition of sustainability. Before it can be fully decided whether this statement is realistic and whether anything can be done about it there has to be an analysis of the problems. Sydney's natural environment makes it a beautiful and outgoing place to live. However, it won't stay like this forever. Cars are still a major contributor to poor metropolitan air quality. The city is facing many challenges in sustainably managing its natural and cultural resources to ensure they meet the needs of current and future residents of the region. It is getting harder and harder for Sydney to fund infrastructure which must be taken into consideration. The population is increasing due to higher birth rates and net migration, this increasing population means households are becoming smaller. Sydney also needs to provide quality jobs as it is a global city that attracts international investments and careers. We need to manage our use of natural resources more wisely. As a big city we consume large amounts of resources and dispose of large amounts of waste to landfill. The costs of building and maintaining infrastructure to supply water and energy to meet increasing consumption and population growth are extremely high. Apart from these major sustainability problems of natural resources, employment, transport, housing, urban growth, infrastructure and natural environment, there are other issues relating to lack of public space, ethnicity, crime, affordability, demographics and much, much more. As a team working community, Sydney may be able to change the forecasts and find sustainable ways with which to manage its issues. It needs to value the land that surrounds it so that trade-offs are clear. It could create balance between roads and public transport provision and use. It could build more facilities for walking and cycling. It needs to make the most of public transport, energy, water and waste facilities, school and hospitals before new infrastructure is built. Well located land for industry, supported by transport and communications infrastructure, is also needed. A special challenge is to increase the number of quality jobs in western Sydney. New land development on Sydney's fringe will need to more elf-sustaining by providing services locally including a good range of jobs, as well as access to transport, parks and community services, including schools and hospitals. If we link with the regions close by and try these sustainability problems there is a good chance that Sydney could become sustainable in the future. If we look after our environment, support a competitive economy and create better places to live and work Sydney can reach sustainability. It is about improving the quality of life without leaving a burden on future generations.

Corporal Punishment: an Effective Tool in Child Discipline Essay

â€Å"For every action, there’s a reaction†, states Newton’s law of motion. This obvious truth doesn’t apply to just physics alone. It can also be applied to the human personality. When applying it to a child’s behavior, especially from a very early age, children need to be taught that their actions will have consequences. Being the sponges that they are, sometimes they absorb bad behaviors. Since they are inexperienced and need guidance throughout their life, there are different methods of discipline that can help correct their bad behaviors and actions. One way that is often effective is by explaining to the child why certain behaviors are not acceptable. But when a simple explanation isn’t enough, or when the child refuses to apply counsel, parents do have one last resort: corporal punishment. When parents do in fact use corporal punishment on their children, it normally is done after other forms of discipline have lacked effectiveness. For example, what if little Johnny has started hitting his young sister when she plays with his toys because he is not fond of sharing? We all know that sharing is one of the first principles that should be taught to children since it teaches them not to be selfish human beings. The first form of discipline that a parent might try is sitting down with little Johnny to explain to him that he needs to learn how to share and that hitting his sister is not appropriate. However, on a second occasion, Johnny hits his younger sister again for the same reason of not wanting to share. This time, the parent gives him a warning which results in Johnny remembering what was explained to him and stopping the wrong behavior, but with a pout. Once again, Johnny hits his sister for taking his toys, but instead of explaining or giving warnings, the parent now takes matters to the next level and decides to spank Johnny on his bottom. This third act of discipline, although still legal in all 50 of the United States, has been under much debate. The main argument that experts have as to why spanking should not be used is that it has negative psychological effects on children which can result in depression or even suicide. (Gershoff). Dr. Elizabeth Thompson Gershoff, PhD, of the National Center for Children in Poverty at Columbia University analyzed 62 years worth of data that looked into the â€Å"positive and negative behaviors in children that were associated with corporal punishment†. She defined corporal punishment as ‘physical force used with the intention to cause pain, but not injury, in order to correct or control a child’s behavior’, but this action turns into abuse when it is taken to the extent of â€Å"punching, beating, kicking, biting, burning, shaking, yanking hair, twisting ears, and making a child stand in the same place for a long time, even if no injury results† (The Spanking Debate). In her study she found that the use of corporal punishment â€Å"increased child aggression and antisocial behavior†. But one main thing she pointed out about her findings is that the negative effects on the child were seen in association with the use of corporal punishment to the extent of physical abuse to the child (Gershoff). Dr. Gershoff herself admits that the results of her findings are not concrete evidence as to why corporal punishment should not be used because â€Å"they almost never record whether the punishment was deliberate or impulsive, or if it was a first resort or a last resort† (The Spanking Debate). This last admission about her own results shows how different discipline techniques gives different results. Corporal punishment that is administered lovingly should not be expected to provide the same results that abusive corporal punishment will obviously show. Most of the results taken from Dr. Gershoff’s study, although said to support the argument of how corporal punishment should not be used, lacks to explain the different results obtained if corporal punishment where administered in a loving way with the intent to guide children in the right direction and to help them develop the correct principles in order to become good citizens in today’s society. The fact that different parents administer corporal discipline at two completely different extremes is a major factor that needs to be more profoundly investigated. Although Dr. Gershoff’s analysis did contain both of those extremes, the results from the type of discipline used also gave different results. With these two variables being a part of Dr. Gershoff’s equation, it is argued that although severe forms of corporal unishment do exist, the positive effects of when it is correctly applied by means of a moderate and occasional spanking by parents who continuously convey their love for their child and explain the reasons for their actions, result in huge benefits for the child that overshadow the temporary pain that they may encounter because of the appropriately administered corporal punishment (The Spanking Debate). Robert Larzelere, a psychologist at the University of Nebraska Medical Center, reviewed 38 studies in relation to corporal punishment and came to the conclusion that when moderate and un-abusive spanking was administered, it reduced misbehavior in children without having the negative psychological effects that some psychologist claim that corporal punishment has. According to Larzelere, not only did that type of discipline work, â€Å"but it also reinforced milder forms of discipline, so that children are more apt to respond without spanking the next time† (Time). Edward Ledezma, who had been a single parent for about 7 to 8 years, recalls having to spank his daughter on two different occasions because his five year old daughter, Lilly, was continuously not listening to his instructions. That was the first and only time he had to use that type of discipline, and it was only after trying to explain to her first why she needed to listen to him. Now that she’s nine, there’s is no indication that she has psychological problems. On the contrary, she’s at the top of her forth grade class, is a well behaved girl, has he utmost respect for her dad, and loves him unconditionally. The loving corporal punishment that Edward had administered four years ago had served its purpose and he did not need to use it again. It shouldn’t be a surprise that such a debate on corporal punishment continues. On one side there are experts that say that abusive corporal punishment is wrong because of the negative psychological effects and who would doubt that it would. On the other hand, parents can reap the benefits with administering corporal discipline in a loving way. The argument should not be whether to administer corporal punishment but rather parents need to be taught that although it works, the only way they can sow the benefits from it is if they administer it within limits and only as a last resort.